PLEASE NOTE: KINDLY USE THE FOLLOWING AT YOUR OWN RISK…IT WORKED FOR ME…WITHOUT ANY PROBLEMS AT ALL, BUT I DO NOT GUARANTTY IT WILL WORK FOR YOU ALSO.
CHANNELS AVAILABLE
TELEVISION: The following are some of the channels you'll pick up once entering the settings below: ASTV, Mindset Health, Botswana TV, Vivid Mosiac, God TV Africa, Hope Channel Africa, ITV, Astro and various commercial channels. RADIO: Radio2000, SAFM, Ikwekwezi FM, 5FM, RSG, Lesedi FM, Lotus FM, Metro FM, Good Hope FM, YFM, Classic FM, DW Radio, Radio Pulpit/Kansel, Impact Radio, Radio Pretoria, Trans World Radio, Channel Africa.
SETTINGS
Step 1:
Before setting up your decoder, please ensure that your decoder software is upgraded to the latest version. To perform a software upgrade:
Press the MENU button.
Select "ADVANCED OPTIONS" and press OK.
Select "DSD UPGRADE" and press OK.
The decoder should start to upgrade the software now. If you are not sure about the version of your decoder software, you can contact Multichoice or your local DSTV technician/supplier and they will be able to help you.
Step 2:
Press menu
Select "Advanced Options"
Select "Dish Installation"
Enter the pin "9949"
Select "Network Configuration"
Select "Network 2 Setup" NB: Leave "Network 1 Setup (Home)" unchanged!!
Set Signal Setup to "Enabled" by selecting it, and moving left or right
Set Frequency to "11170"
Set Symbol Rate to "26652
Set Polarization to "Vertical"
Set FEC to "3/4"
Select "Accept these settings"
Step 3:
Select "Network 3 Setup"
Set Signal Setup to "Enabled"
Set Frequency to "11625"
Set Symbol Rate to "15000
Set Polarization to "Vertical"
Set FEC to "3/4"
Select "Accept these settings"
Step 4:
Select "Network 4 Setup"
Set Signal Setup to "Enabled"
Set Frequency to "11674"
Set Symbol Rate to "26652
Set Polarization to "Vertical"
Set FEC to "5/6"
Select "Accept these settings"
Step 5:
Select "Network 5 Setup"
Set Signal Setup to "Enabled"
Set Frequency to "12522"
Set Symbol Rate to "26657
Set Polarization to "Horizontal"
Set FEC to "1/2"
Select "Accept these settings"
Step 6:
Select "Network 6 Setup"
Set Signal Setup to "Enabled"
Set Frequency to "12562"
Set Symbol Rate to "26657
Set Polarization to "Horizontal"
Set FEC to "1/2"
Select "Accept these settings"
Step 7:
Select "Network 7 Setup"
Set Signal Setup to "Enabled"
Set Frequency to "12682"
Set Symbol Rate to "26657
Set Polarization to "Horizontal"
Set FEC to "1/2"
Select "Accept these settings"
Step 8:
Select "Network 8 Setup"
Set Signal Setup to "Enabled"
Set Frequency to "12722"
Set Symbol Rate to "26657
Set Polarization to "Vertical"
Set FEC to "1/2"
Select "Accept these settings"
Step 9:
Exit once to go back to the "Dish Installation" menu
Select "Scan All Networks"
Your decoder will go into scanning mode and might take a while to scan all 9 networks. Do not interrupt the process even if it seems to take longer than you expected!
Once completed, your picture will return as normal
To access you public channels, press the "TV button" on your remote control. The "Bouquet Options" menu will appear. Select "Public PAS7/10" Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. Simply select the channel you wish to view and press ok to tune.
To access the radio channels, simply select the "music note" on your remote (while still on Public PAS7/10 bouquet) and select which channel you would like to listen.
Enjoy!
Source: Here